- [ ] LivMote Thermal Scanner. If the client wants to use their RFID badge, please ensure you have the right model. If their RFID card is 13.56Mhz, make sure your device’s Part Number (PN) ends in 3B. If their RFID card is 125Khz, make sure your device’s PN ends in 3N.
- [ ] Mount. Generally speaking, LivMote works best installed at around 50-52”, tilted back at a 50 degree angle to accommodate people of varying heights. You should have a wall mount, floor stand, or other mount from us. If not, you can still use a VESA 100x100 mount, but only half of the holes can be used.
- [ ] Extension Cord. Optional, but good to have especially since the LivMote plug is only ~5 feet long.
- [ ] PoE Splitter. If the installation requires power over ethernet (PoE), you will need an additional adapter that splits PoE into power and ethernet. The adapter needs to support 802.3af and has to have a 2.5mm barrel. You can order the right PoE splitter directly from us, email [email protected].
- [ ] [Optional] Extra Screws, Nuts, and Washers. For mounting LivMote’s security bracket, you’ll need M3 screws, nuts, and washers. It is always helpful to have some extras to avoid issues during an installation.
You can find the complete set of helpful things to have in the link below:
Installer's Toolkit
NEXT:
What's In The Box?